|
|
Home > Countersink Cutters And Drill Accessories
Countersink Cutters And Drill Accessories
Piloted Aircraft Stop Countersink Cutters (often called micro-stop cutters, or microstop countersinks) are used to make precision countersinks to accept flush-head fasteners.
Omega Technologies cutters are precision ground to exact tolerances to insure concentricity. Cutters may be used in any micro-stop ''cage'' that accepts 1/4 - 28 threaded shank cutters.
Select the pilot diameter that matches the pre-drilled hole, and the body diameter according to the diameter of the fastener head. Metric and other sizes quoted on request.
 Our chip chasers are made in the USA of stainless steel and are available in long and short versions.
|
 Piloted Aircraft Stop Countersink Cutters (often called micro-stop cutters, or microstop countersinks) are used to make precision countersinks to accept flush-head fasteners.
|
 Drill Collets effectively convert a Straight Shank tool of any kind (typically drills and reamers) into a Threaded Shank tool. Most commonly used to adapt drills, they can be used with broken drills, reamers, or other straight shank cutting tools.
|
 These drill stops have a coiled spring to cushion drill break-through, while the rounded smooth face eliminates marking and prevents the drill chuck from marring the surface. Other sizes are available upon request.
|
 Microstop Cages provide precise depth control by limiting the travel of the cutter being used, and aiding in the alignment of the cutter so that it is exactly perpendicular to the surface against which the cage rests.
|
 These cutters trim excess material from flush-head rivets. They are precision ground and carbide-tipped, ensuring less chatter and increasing the overall life of the cutter.
|
|
Orders and inquiries can be made by phone, online, fax, or email.
Office Hours:
Mon - Fri 7:30A - 5:00P, PST
Phone:
800.888.4005
818.264.7970
Fax:
818.264.1414
Address:
31125 Via Colinas, Suite 905
Westlake Village, CA 91362
|
|