|
| |
Apex 1/4'' SAE Square Drive Sockets
Apex 1/4'' square drive sockets, SAE. Apex industrial grade impact sockets are available in a wide range of lengths and wall thicknesses, and with single or double hex openings. Apex sockets have hex tolerances that are on average 48% tighter than DIN and 35% tighter than ANSI requirements. With Apex you are assured of an exact, sure fit. All Apex sockets have the tightest tolerances for straightness and concentricity in the industry. High strength fasteners in demanding situations, like those found in the automotive and aviation industries, often require the use of an impact wrench or impact driver to deliver the amount of torque required to tighten or loosen them. Apex impact sockets are specifically designed and manufactured for high impact use, and made from a tougher and more ductile alloy steel which is then heat treated for extra durability.
 Apex 1/4'' square drive sockets, SAE, 6 point and 12 point, standard length.
|
 Apex 1/4'' square drive sockets, SAE, 6 point and 12 point, long length.
|
 Apex 1/4'' square drive sockets, SAE, 6 point and 12 point, extra long length.
|
 Apex 1/4'' square drive sockets, SAE, magnetic, 6 point, standard length.
|
 Apex 1/4'' square drive sockets, SAE, magnetic, 6 point, long and extra long length.
|
 Apex 1/4'' square drive sockets, SAE, surface drive and fast lead, standard and long length.
|
 Apex 1/4'' square drive sockets, SAE, for sheet metal screws, 6 point magnetic and 6 point non-magnetic, for predrilled holes.
|
 Apex 1/4'' square drive sockets, SAE, for sheet metal screws, 6 point and 6 point magnetic, self-drilling and tapping screws.
|
 Apex 1/4'' square drive sockets, SAE, for square nuts (single square and double square).
|
|
|
|
|