|
Chucking Reamer, .0870 Diameter, Non-Piloted, HSS, 7'' OAL, RMA0S0870
Part Number: RMA0S0870
Brand: Omega Technologies
Product sold in increments specified in the ‘Quantity’ box
View Shopping Cart | Proceed to Checkout |
|
|
Reamer, Chucking, HSS, 0.0870, Non-Piloted, 7'' OAL DescriptionVERY LIMITED QUANTITY ITEM! Reamers are used throughout the industry to improve the dimensional precision and wall finish of the inside of holes prior to fastener installation. This becomes critically important in aircraft work, especially for interference fit fasteners where closely controlled dimensions are crucial. Reamers are frequently employed to enlarge or ''finish'' holes. Piloted reamers are particularly useful for maintaining the concentricity of the reamed hole with a pilot hole, or when enlarging a hole for an oversized fastener. A portion of the tip of the reamer (the ''pilot'') is ground to the diameter of the initial hole. The reamer then centers itself on this pilot hole as it travels the length of the hole, enlarging it to the final diameter Technical SpecificationsStyle: Chucking
Material: HSS
Flute: RHC
Diameter: 0.0870
Pilot: Non-Piloted
Overall Length: 7" 
|
| Products in the same category as the Chucking Reamer, .0870 Diameter, Non-Piloted, HSS, 7'' OAL, RMA0S0870
|
|
|
|