|
|
Mountz Run Down Adapters
Mountz Run Down Adapters are designed to simulate the fastening process of a screw. Mountz run down adapters improve testing repeatability by adjusting for the impact force and irregular peaks of power tools. Mounted in-line between the tool's driver and the transducer, a run down adapter provides consistent and reliable torque readings.
Mountz Standard RDA Run Down Adapters are mounted in-line between the tool drive and the transducer of a torque analyzer or sensor, reducing the impact and irregular peaks that cause poor testing repeatability.
|
Mountz AURA Auto Reversing Run Down Adapters' auto-reversing feature allows operators to speed up the power tool calibration process by automatically reversing into the backed-up position for repeated use with fewer steps.
|
Mountz Mini RDA Run Down Adapters allow for an accurate simulation of actual joints. Mini RDAs are designed for use with Mountz torque analyzers and Mountz BMX20z - BMX10i and MTX low torque sensors.
|
Mountz Screw RDA Run Down Adapters are designed to be used with EZTorQ torque analyzers to provide consistent and reliable torque readings for power-driven torque control tools. Run down adapters are used to simulate various joint characteristics.
|
Mountz Spring RDA Run Down Adapters are designed to be used with EZ-TorQ torque analyzers to provide consistent and reliable torque readings for power-driven torque control tools. Operates in a clockwise direction only. Completely back up after run down.
| |
|
|
|
|